Harrington Industrial Plastics LLC

Minimum quantities required. 24 Copyright © 2025 International Polymer Solutions, A Graco company | P: 435.783.6040 | [email protected] | https://ipolymer.com These valves offer precision performance under extreme conditions. Their virgin PTFE wetted surface designs provide unsurpassed chemical compatibility with a variety of flow media. Offered in 2-way and 3-way options with a PTFE hard seat or FKM (Viton eq.) O-ring, these valves are suitable for a variety of ultra-clean and highly corrosive media for semiconductor, pharmaceutical, biomedical and chemical process applications. The PTFE body, valve stem and one-piece diaphragm maintain a material inert boundary for ultra-clean applications. Miniature Solenoid Valves • Solenoid Valves are designed for Continuous Duty Cycles of 50% or less and for Energized Dwell Periods of no longer than 90 minutes. Best performance when energized for 30 minutes or less.* • For many applications, the Duty Cycle or Energized Dwell

“Minimum quantities required” · Polymer · open the document (PDF)

GUARANTEE OF SUITABILITY FOR ANY PURPOSE. NO VARIATIONS OF THIS WARRANTY SHALL BE HONORED NOR CONSIDERED LEGALLY BINDING, EXCEPT WRITTEN AGREEMENTS SIGNED BY THE

“GUARANTEE OF SUITABILITY FOR ANY PURPOSE” · Polymer · open the document (PDF)

Chemical, Pharmaceutical and CIP Applications. RES High Temperature Suction & Discharge TUBE White, FDA, 3-A*, Chlorobutyl COVER Blue EPDM w/white stripe REINFORCEMENT Spiral-plied synthetic fabric TEMP. RANGE -40 to 225° F RECOMMENDED CLEANING CIP, COP R -Series Rubber Hose RDC150 11/2" 2.07" 250 PSI - .98 lbs. - 100' RDC200 2" 2.59" 250 PSI - 1.38 lbs. - 100' RDC250 21/2" 3.11" 250 PSI - 1.78 lbs. - 100' TUBE White, FDA, 3-A*, EPDM COVER Blue EPDM Synthetic Rubber REINFORCEMENT Two polyester spirals with dual wire helix TEMP. RANGE -40 to 300° F RECOMMENDED CLEANING CIP, SIP, Autoclave Note: EPDM not recommended for use with petroleum based uids RES050 1/2" .94" 150 PSI 2.0" .28 lbs. 29" 130' RES075 3/4" 1.22" 150 PSI 2.5" .47 lbs. 29" 130' RES100 1" 1.46" 150 PSI 3.5" .57 lbs. 29" 130' RES150 11/2" 2.00" 150 PSI 6.0" .88 lbs. 29" 130' RES200 2" 2.52" 150 PSI 7.5" 1.13 lbs. 29" 130' RES250 21/2" 3.17" 150 PSI 9.0" 1.87 lbs. 29" 130' RES300 3" 3.70" 150 PSI 11.0" 2.24lbs. 29" 130' ALL R-Series hose products meet/comply: USDA Class III requirements, FDA CFR Title 21.1772600, 3-A 18-03 *The 3-A 62-02, standard applies only to assemblies of 3/4" diameter and larger. WARNING Working pressure ratings for all Flex-Rite™ brand hoses are based on 70° F (ambient temperature). Working pressure and vacuum ratings will decrease as temperatures increase. For “R” series applications that exceed 200° F contact manufacturer for suggestions.

“Chemical, Pharmaceutical and CIP Applications” · Ace Sanitary Brochure-092918 · open the document (PDF)