Product line
Deadbolts
Made by Pdq Industries, LLC · Lancaster, PA
- Hand
- non‑handed
- Size
- 2 3/4" backset
- Price
- 92
- Backset
- 2 3/4",fixed=yes
- Material
- Hollow Metal
- Standard
- Standard Duty
- Deadbolt pin
- 1/4 in case‑hardened steel roll pins
- Deadbolt throw
- 1 in
- Deadbolt material
- brass
- Product class
- Doorlocks and locksets; screen, storm door, and window hardware; cabinet and closet hardware; hinges, padlocks, door controls, and other builders' hardware (including architectural trim hardware)NAPCS 2041500000
From Pdq Industries, LLC’s own documents · read October 22, 2026 · not verified by FactoryRegistry
7 families in Deadbolts
11 models
| Model | Backset | Faceplate | Door thickness | |
|---|---|---|---|---|
| KM 148 Deadbolt | — | — | — | |
| KMS Deadbolt | 2.75in/2.375in | 1.125in_square_corner | 1.75in | |
| KMS ViZpin Deadbolt | — | — | — | |
| KT 116 | 234 | — | — | |
| KT 121 | 2 3/8" | — | — | |
| KT 125 | 2 3/8" | — | — | |
| KT 137 | 2 3/8" | — | — | |
| KT 148 | 2 3/8" | — | — | |
| KT Extra Heavy Duty Deadbolt | — | — | — | |
| KV 125 2 3/8" | — | — | — | |
| PB-9/02 | 2.75in | 1.125in | 1.75in |
Documents
- HeavyDuty
- SECURING
- StandardDuty
- X:\Instruction-Template\OE\OE-97xx\OE-9706 - KMS Template.dwg
- X:\Instruction-Template\OE\PB-97xx\PB-9702 Rev0 - KMS PB Deadbolt Template 2 3-4.dwg
- X:\Instruction-Template\OE\VZ-97xx\VZ-9707 Rev0 - KMS VZ Deadbolt Template.dwg
- PRICEBOOK
- 2. Drill holes 3. Install Dead Boit 4. Prepare Door Jamb
- KT Extra Heavy Duty Deadbolt TOOLS NEEDED FOR INSTALLATION
- GTSeries
- pdqlocks.com
- KM4116 Model (1)
- KM4116D Model (1)
- KM8116 Model (1)
- KT4.dwg
- KT4D
- KT8
- KT8D
- KV4125
- KV4125D
- KV8125
- KV8125D
- KVA125
- KVA125D
Where this comes from — 24 documents
A machine read this from documents Pdq Industries, LLC publishes on its own website, as of October 22, 2026. FactoryRegistry has not verified it; the documents are the authority.
- HeavyDuty: “-”
- HeavyDuty: “HeavyDuty”
- SECURING, page 37: “deadbolt_throw: 1 in”
- StandardDuty, page 1: “Standard Duty Bored Deadbolt KV Series Architectural Submittal Sheet”
- StandardDuty: “StandardDuty”
- X:\Instruction-Template\OE\OE-97xx\OE-9706 - KMS Template.dwg, page 1: “Faceplate 1 1/8" Square Corner”
- X:\Instruction-Template\OE\OE-97xx\OE-9706 - KMS Template.dwg: “X:\Instruction-Template\OE\OE-97xx\OE-9706 - KMS Template.dwg”
- X:\Instruction-Template\OE\PB-97xx\PB-9702 Rev0 - KMS PB Deadbolt Template 2 3-4.dwg: “-”
